Dino Stencil Cards XL

After getting the feedback of the previous version, I improved and scaled the dino cards. Now, it has less detail (to be stronger), and they are scaled to fit 2 of them in a plate. This version has been done thinking specially for the youngest kids (and for them, my recommendation is to print them in PETG )

A tyrannosaurus, a triceratops, a parasaurolophus, a velociraptor, a diplodocus and… a chicken. Why a chicken? To also get the opportunity to teach to our kids that the dinosaurs are still among us.
 

Print settings settings used:

• 0.2 or 0.16 layer height
• solid (5 floor, 5 top, 3 walls)
• No support or brim
• Arachne wall generator
• slice gap closing radius: 0.01
• resolution: 0.012
• iron (the settings totally depends of your printer and filament), but in my E3V3 it finished with: All top surfaces, rectilinear, 20mms speed, 20% flow, 0.15mm line space

• Bigger: now we can print 2 of them in every 18x18 plate (instead of all)
• All details have been refactored and revised to avoid small parts
• velocirraptor with claw
• behind legs with line to provide more strength to the card
• 1.6mm Z to fit perfectly with 0.2 and 0.16 print settings