…Please be sure to hit like & post a make, I'd love to see your prints!
The COOLBAR uses 3x 4010 axial fans to cool anything that'll fit under them.
PSU's, mainboards, Rpi's SSR's, …anything! They're big enough for a SKR 3 ZE with EXP MOT board addition or an Octopus Pro mainboard.
Print:
Print face down with auto tree supports! Make sure your support settings are good, DONT leave a bad review because you couldn't remove YOUR supports!
use ASA/ABS or better. PETG at a push.
You will need:
12x M3 Voron BOM heat inserts
16x M3 12mm Cap head bolts
This model is designed for use with this DIN Rail mounting clip. Print 2 of them!
https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl
Mount these clips on the bottom of the COOLBAR's feet & clip onto any DIN Rail!
ANY ISSUE OR CHANGES…. let me know!
The author marked this model as their own original creation.