Neutrik d-size chassis connector wall plates and frames

Wall socket plates for Neutrik speakON and other d-size chassis connectors, to be used with Attema U40/U50 wall junction boxes. Frames included allow for 2x3 and 1x3 configurations.

2 versions of plates included, 4.4mm recessed for the plastic connectors, 2mm recessed for the metal chassis connectors of which 1 compatible with the etherCON. The 3rd plate is just a hole to run cables through.

A little tool to rotate the mounting points of the Attema U40/U50 is also included.

Note: to print the back plates on an Ultimaker 2, disable the skirt etc.

Materials and methods

Print list:

• 1x3-back-plate
• 2x3-back-plate
• wall-socket-2mm
• wall-socket-4mm
• wall-socket-hole
• wall-socket-rotator

Part list:

• any d-size chassis connector in 2mm or 4.4mm
• some screws, din 7983 2.9 x 9.5

Part links:

• http://www.neutrik.com/en/speakon/speakon-chassis-connectors/speakon-chassis-connectors/
• http://www.neutrik.com/en/xlr/xlr-chassis-connectors/dlx-series/
• http://www.neutrik.com/en/data/ethercon/ethercon-chassis-connectors/d-series/
• https://www.microschroeven.nl/index.php?action=article&aid=1749&group_id=-4&lang=nl
• https://www.attema.com/en_NL/products/installation/traditional-flush-mounting-boxes/1230-u50-junction-box/