Sovol SV08 closed top extention lit with filtration (HEPA+Carbon) up:27.07.24

Sovol SV08 closed top extention lit with filtration. You can use Roborock S7 Hepa filter and carbon filter at the same time.

Upgrades:

1. Fully closed
2. Stackable
3. Filtration
4. Cut-outs for the fan and the filament sensor cables
5. Every parts located to the right side of the printer
6. Filament is also at the right side, you can use filament dryer

BOM:

M3x4x4.5 heat set inserts for the filter and if you want to stack more level.

M3 screws in various size.

2x6015/6020/6025 24V fans + wires to connect to mainboard.

About 1kg filament. I used PETG.

Updates:

08.12.2024. Added rsdoc model (DesignSpark Mechanical). You can convert is to STEP, using DSM 7 days trial version!

27.07.2024. New pictures

19.07.2024. New filter parts for Roborock S7 hepa filter with dual 6025 fans.

04.07.2024. Make the filament holder holes bigger + modified filter grill vertical fixing hole

03.07.2024. New pictures

28.06.2024. Make the filament sensor holder lighter.

27.06.2024. Top screw holes fix to print without support. 0.3mm thin layer.

Differences:

1. Fully closed
2. Stackable
3. Filtration
4. Cut-outs for the fan and the filament sensor cables