Bed Leveling Spacers for K1 Max

This is a collection of multiple height and width combinations Bed Spacers for the K1 Max (may work with K1 but I don't have one to know for sure). 

For me the 13x12mm were the best option for the bed leveling knobs, because the width works best for not bending the Bed Heater, but some people prefer the 12x12mm or even the 10X9mm. For the 13X12mm I needed to use M4X25 screws.

The hole in the middle fits perfect the M4 screw for connecting the K1 build plate to the tram. 

These need to be made out of TPU 100% infill, so that they can be squished when adjusting the bed to allow you to level the bed manually without having to use Creality's tooth skipping procedure.

10x9mm (Stock Screws can be used)

10x10mm (M4X20 Screws recommended)

10x12mm (M4X25 Screws needed)

12x9mm (Stock Screws can be used)

12x10mm (M4X20 Screws recommended)

12X12mm (M4X25 Screws needed)

13x9mm (Stock Screws can be used)

13x10mm (M4X20 Screws recommended)

13x12mm (M4X25 Screws needed)