Sony NP-FW50 battery holder - print optimized

Battery holder for sony batteries, available in multiple sizes

Features:
- Allow easy printing, less visible layer lines
- Multiple sizes to choose from

NOTE: Layer adhesion must be spot-on, or the latch strength will be greatly compromised! Do not print too hot/cold, do not cool down layers too fast!
 

Recommended print settings:
- Nozzle diameter: 0.4mm
- Layer height: ≤ 0.2mm
- Print orientation: as imported
- Supports: none


Recommended materials:
 - PETG

Changelog:
 

Changed print orientation