Case for Raspberry Pi with UPS hat (X728) and optional heatsink

I needed to install UPS shield/hat on my Raspberry Pi and keep it safe… turns out the UPS board is larger than the Pi so I had to design it myself. 

UPS hat: GeekWorm X728
Heat sink: GeekWorm P165-B

The case fits both options - with or without the heat sink. You just need to use the proper spacers (that already come in the X728 kit).

I have MMU3 so I also provided a 3MF file with translucent window for the battery charge status as well as some simple instructions on top. STL are plain with no MMU support.

I made holes only for the following:

Pi board

• SD card
• Activity and Power LED
• Power, 2x HDMI, Audio Jack
• 4x USB, Ethernet

UPS hat

• Power
• Status and power LED
• Power button (top)