Gridfinity tray for the Taiwan Engineer PA-09 crimping tool

Gridfinity compliant, low-profile tray/holder for the Taiwan knockoff Engineer PA-09 open barrel terminal crimping tool. Printed in PLA with a 0.4mm nozzle and 0.2mm layer height.

Please note that the original Japanese PA-09's will not fit in this tray since there are significant differences in the physical outline of those two. If you want a Gridfinity tray for those, look here:

https://www.printables.com/model/943707-gridfinity-tray-for-the-japanese-engineer-pa-09-cr

I did not completely design it from scratch. I used schenklooza's excellent Gridfinity Parametric Blank bin as a starting point:

https://www.printables.com/model/492701-gridfinity-parametric-blank

A big thanks to schenklooza for his thoughtfully designed and incredibly useful blank. It saved me a ton of work. The tray is 2 Gridfinity bins wide by 5 long and 1.75 Bin units high (approx. 23 mm overall).