CASA Zip Clips

If you need to run any cables externally on CASA you can use this modified Voron 2020 zip tie clip to fit over any current panel.

Credit to the Voron Design Team for the original file which can be found here: https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/cable_frame_anchor_x6.stl

Print Settings:

Print at 100% since I already accounted for shrinkage.

Assembly

Designed to use M3 x 10mm socket head screw and drop in or hammer head nut. Includes a knock out for existing panels so no the modifications are required.

Enjoy!