Honycomb Notebook/ Tablet Stand

This is a honycomb notebook stand original made for a Thinkpad P1 with a thickness of 22mm. Of course any other gadget like a tablet can fit. For these  i added an 12mm version.

Print instructions:

• No support. 
• A brim can help for better bed adhesion. 
• Infill: 10-15%.
• Wall print order: Inner/Outer
• Tested with 0.4 and 0.6 Nozzel; I recommend 0.6mm

Shorter and wider (22,5mm) version. Perferkt fit for a Thinkpad P1