Gridfinity tray for IWISS HSC8 style crimping tool

Gridfinity compliant, low-profile tray/holder for the IWISS/iCrimp HSC8 ferrule crimping tool. The one show in the picture is a knock-off brand but it has the same physical size as the original. Please note that some brands of HSC8 type crimpers may not fit. I suggest you use the “negative volume” feature in your slicer to make a partial print of the tool outline before committing to the full print.

I did not completely design it from scratch. I used schenklooza's excellent Gridfinity Parametric Blank bin as a starting point:

https://www.printables.com/model/492701-gridfinity-parametric-blank

A big thanks to schenklooza for his thoughtfully designed and incredibly useful blank. It saved me a ton of work. The tray is 2 Gridfinity bins wide by 5 long and 2.75 Bin units high (approx. 31 mm overall). Printed in PLA with a 0.4mm nozzle and 0.2mm layer height.