BMW Exhaust hanger (outer) 18307633093

Did part of your exhaust hanger also crack, leaving your exhaust dangling by the flex pipe or rear hanger? Well mine did, with the bushing itself still in good condition and chilling on the exhaust. This replaces the outer cast aluminium or zinc part and clamps with the original fastners which are more than long enough. Should fit many BMW sedans with the N20 or N26 motor; this is for my N26 F30 328iX, and should also fit F20, F21, F22, F23, F30, F31, F32, F33, F34 and F36

Fits (according to realoem): 

Part should be printed sideways (see pics) so the part is stronger for the forces it should see. Use a support if needed for the lip. Printed with PLA, but should work with PETG or other materials. I used 25% Gyroid infill, with 6 wall loops and 8 top/bottom layers 

This reuses the original bolts, lower plate and the rubber bushing. 

How long will it last? idk. I'll see if it needs more strength or changes if it breaks quickly, or if it sees too much heat