Drain Pipe Adaptor 50mm to 68mm

This model enables water to flow from a 50mm drain pipe to a 68mm drain pipe. It is designed specifically to connect these two pipe sizes, ensuring a smooth transition for water flow.
 

Many thanks to huzy85 for the original model! I have modified and resized the original using PrusaSlicer to accommodate a 50mm pipe.

Printed in PETG with a Prusa MK4 using the 0.20mm Speed preset. Print time is approximately 2 hours. ABS is also a suitable filament option.

Note: I have only tested this model in PETG. Be aware that some shrinkage may occur with ABS, so you might need to resize the model to accommodate this filament choice.

Changed 40mm to accept a 50mm pipe insertion. Resized 68mm end to enable it to be inserted inside the 68mm receiving pipe.