IKEA Heat | Trivet / pot stand wall holder

Simply attach them to the wall using a good double-sided adhesive. 

Place them about 11 cm or 4 inches apart.

For those interested, this is the adhesive we use (affiliate link)
3M VHB or similar is the reference name.

Check out our Household collection for more functional household designs like this one.

Printing

Print in the provided orientation for best results.

We printed it on our Prusa Mini+ using a 0.6 mm nozzle and 0.3 mm layers, 10% infill, 3 perimeters, 2 bottom layers and 4 top layers. 

The parts have a built-in support tab, so you don't need to enable supports generation.

The tab is 0.3 mm thick, so you need to use Arachne perimeter generator or enable “thin walls detection” in your slicer.

Follow us on Instagram! 

If you really like what we are doing and want to support us, you could buy us a coffee or two!  

It helps us continue creating usable things for 3D printing.

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you would like to sell 3D prints of our designs in your store, you can join one of our KoFi membership tiers! 

If you have other ideas, we would be happy to hear from you! Please send us a message through Printables or Instagram.