Anycubic Kobra 2 Neo Spool Holder

This is a spool holder designed for the Anycubic Kobra 2 Neo using the 2 threaded inserts at the top of the printer and the twist-in spool post that comes with the printer. These inserts are 30-31mm apart and are perfect for this type of design!

 This design is loosely based on https://www.thingiverse.com/thing:6359735 for the mounting, but the rest is my own design. I printed this in white PLA, but I assume most would want to print this in black to match.

This uses 2x M4 10mm screws and 2x washers (10mm). 

Using regular PLA for this will sag overtime (learned the hard way). I recommend ABS, ASA, or PETG. PLA+ or other strengthened PLAs could also work, but  I haven't tested it.

Print Settings

Printer Brand:

Anycubic

Printer: 

Kobra 2

Rafts:

No

Supports: 

No

Resolution:

.3

Infill: 

25%

Filament: Anycubic PLA 
 

Notes:

Supports may be needed for the 2 nibs in the spool post hole, but not for the 2 bolt holes. I used the paint on supports feature in prusa slicer for those.

I used around 4 perimeters to keep the part strong. 

How I Designed This ===================

Onshape Link

https://cad.onshape.com/documents/9cbdfb30939c3ad1ea035fe2/w/fff96aa74c803b5336bdff35/e/6935ee9b9172b45a1c7a1cd4?renderMode=0&uiState=659edc49284b604322afb9e2
I set some variables for changing tolerance and removing washer holes. In the current published design, the washer holes are 12mm when they usually need to only be 10mm. I might post a version with this change and also a version with none at all, but for now it should be fine.

Category: 3D Printer Accessories