Building Face
It's a building, but it's a face too?
7
15
0
156
updated November 28, 2024
Description
PDFWhat if the buildings had the shapes of faces?
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA BambuLab Basic Black
- PLA PolyTerra Charcoal Black
- PLA Overture Cement Gray
- PLA+ Sunlu Gray
- PLA BambuLab Basic Gray
- PLA Overture Light Gray
- PLA BambuLab Basic Jade White
Swap Instructions:
- Start with Black
- At layer #9 (0.8mm) swap to Charcoal Black
- At layer #12 (1.04mm) swap to Cement Gray
- At layer #16 (1.36mm) swap to Gray
- At layer #25 (2.08mm) swap to Gray
- At layer #32 (2.64mm) swap to Light Gray
- At layer #38 (3.12mm) swap to Jade White for the rest.
Tags
Model origin
The author marked this model as their own original creation.
