cloud box · magnetically stackable · XL

cloud box · XL

modular and stackable through magnets

~assembled dimensions in mm > x:125 · y:155 · z:70

this is a modular design that consists of the boxes themselves, lid, and inserts as options. the stacking between the boxes and lid is achieved through the use of 6x3mm magnets and enable the stacking of the components, resulting in a satisfying "thock" sound and smooth action.

you'll need 10 6x3mm magnets to achieve the same result as shown in the pictures and included in the print profile, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot.

please make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section attracts and not repels the one that will sit above/below

photos show printed in the awesome vibers pla white and stoneFill red brick, kindly provided by the colorFabb team

• 0.20mm layer height
• 10% cubic infill

notes

• includes bambu studio 3mf files and STLs
• all photos uploaded are of the actual printed model, taken inside a light-box or in home studio
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available on my patreon