Kallax Filament Storage Solution

Use your IKEA Kallax shelf unit to store filament with this easy to print, and easy to modify for other shelf units.   I had looked over other available solutions for Kallax filament storage and either they required extra parts (screws, rods), or required multi-part printing.   This is an easy to print solution. The .step file is included so feel free to modify and make it work for any shelf unit. 

There are two options included:  One is a two part print with connectors that you can use to glue the parts together. Option two is a two part that uses a dovetail to snap together. 

Print Settings: This isn't structural so you can use very low infill.  I used 2 perimeters, and only 5% cubic infill.