Wand Stand

After going to Universal Studios and getting a wand from Harry Potter world, I wanted a cool way to display it.

It should fit most of the interactive wands that you can get from the shops in Harry Potter World.

Print Settings

Since the stand is almost purely for looks the print settings are not critical.

I do recommend using a small layer height simply for the most detail.

Stand Base: Printed in Bambu PLA Marble

No support needed 

0.16mm layer height

10% infill

4 top layers

Stand Plaque: Bambu PLA brown and yellow

No support needed 

0.12mm layer height

10% infill

4 top layers

Deathly Hallows Stand: Bambu PLA brown

Support needed: Automatic tree support 

0.16mm layer height

10% infill

4 top layers

If you have it Wood PLA probably would look really good.

Printer

I printed the parts for this on a combination of a Bambu Labs printer and modified Ender 5, really any printer with the ability to do a filament swap at layer change will work fine.

I recommend printing the plaque by itself and doing a layer change to do the text in a different color. If you have a printer with a 0.2mm nozzle it will give a lot higher quality to the text. I did print it with a 0.4mm nozzle and just took a couple of tries to get  pretty.