Magnetic cable arches
A design of a magnetic cable arch I made. Magnets can be attached in the bottom holes to hold them to something magnetic
7
19
0
482
updated June 23, 2024
Description
PDFYou can print them with supports, i used tree supports and with the magnet holes facing down. I used 16x5mm magnets from amazon with screw holes. You can press fit them, but if they are too lose just screw them in.
I made them in three sizes:
Small 49 x 13 mm
Medium: 67X18mm
Large: 82 x26mm
Tags
Model origin
The author marked this model as their own original creation.
