RippleKnit Vase (VASE MODE)

Vase designed to be printed in vase mode, featuring an undulating ripple texture that mimics the look of knitting. This project consists of two parts: the vase itself and the vase's bottom, each with its specific printing requirements. While this project is not difficult to print, it does require attention to detail and some adjustments.

Important: The vase's bottom must be printed first. During the vase's printing process, pause it after printing the open slot for the bottom. Manually insert the bottom into the slot before resuming and completing the vase print (see image for reference).

Vase Printing Details:

• Nozzle Diameter: 0.8mm
• Layer Height: 0.6mm
• 1st Layer Height: 0.6mm
• Spiral Vase Mode: On
• Perimeters: 1
• Solid Layers: Bottom 1 / Top 0
• Fuzzy Skin: All walls / Thickness 0.1 / Distance 0.1 (optional but gives a nice texture)
• Bottom Fill Pattern: Hilbert Curve
• Extrusion Width:
  • Default Extrusion Width: 230%
  • First Layer: 200%
  • Perimeters: 200%
  • External Perimeters: 200%

Bottom Printing Details:

• Nozzle Diameter: 0.8mm
• Layer Height: 0.6mm
• 1st Layer Height: 0.6mm
• Spiral Vase Mode: Off
• Perimeters: 3
• Solid Layers: Bottom 3 / Top 3
• Fuzzy Skin: Off
• Fill Density: 20%
• Fill Pattern: Stars
• Top/Bottom Fill Pattern: Archimedean Chords

This project is perfect for those looking to create a unique and textured vase. Ensure to follow the instructions carefully for the best results. With its beautiful ripple effect and knit-like texture, the RippleKnit Vase is sure to be a standout piece in any setting.

Note: For commercial license, please get in contact via private message.