KLP1 230 Filament Sensor Spacer

Fits the KLP1 230 variant. With the oem screws and two additional M3x40 screws.  

Onshape: https://dub.wfirbolg.ch/fs-sp2

Update: Simplified the hole to pass the sensor cable and adjusted the alignment a bit. My first print was a bit off…

I ended up removing the sensor all together. Most of the filament breakages happened after the sensor and were not detected. Trying to find a way to place a sensor closer to the toolhead so it's more efficient. 

I happened to have some longer screws around and wanted to offset it a bit further as well as place it a bit higher. I was taking measurements and I thought that surely someone had already done the same and indeed they had. So I confirmed my measurements and made it to fit my needs. Thanks to Heine Sørensen for making his part.