Clip-in Net Pots

I often encountered the problem that I had to cut open my net pots when I wanted to transfer or harvest plants (see picture below) in my hydroponic system. Therefore I have designed a few net pots that can be opened and closed in order to reduce damage to plants while transferring and reducing waste while harvesting. By printing these pots you can contribute to sustainability!

Update (13.5.2025): I have added 3'' and mini versions!

Print Settings

• Material: PLA or PETG or ASA (see below)
• Nozzle Size: 0.4mm
• Layer Height: 0.2mm
• Infill: 15% 
• Supports/Brims: Yes/No

ASA and PETG are recommended to print this model because of potential sun and heat exposure (e.g. in greenhouses). For indoor systems, PLA should be sufficient. 

The net pots were designed to fit 48mm neoprene rings. However, you can also use other hydroponic substrates like for example Expanded Clay, Rockwool cubes, Coco Coir, and Lava Stones.

Additions parts:

• 48mm Neoprene Rings or 70mm Neoprene Rings
• iDOO Grow Sponges
• Expanded Clay
• Rockwool cubes
• Coco Coir
• Lava Stones

I have used my reliable Neptune 4 and I can recommend the following filaments:

Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.

If you print one, please post a make! If you encounter any issues, post a comment. Thanks!