Toilet seat support

Update: After a few months of using the old version, it ended up breaking. I made a ‘new version.’ It’s the same one, but I cut it in half and printed it horizontally. This ‘technique’ helps improve the resistance of the piece, preventing it from breaking easily. Both pieces (left and right) can be print at the same time. Down below the config that I used.

Profile

• Layer Height: 0.06mm
• Line Widht: 0.4mm
• Wall Thickness: 0.8mm
• infill: 20%
• Build Plate Adhesion: Brim
• Material: Back PLA for Hellbot.
• Printer: Hellbot Magna SE PRO

Thread

• Thead Type: ISO Metric Profile
• Size: 8mm
• Designation: M8x1,25
• Class: 6g