Clamping strip for DIN A4 sheets
Clamping strip for (also laminated) DIN A4 sheets for wall mounting.
1
10
0
110
updated June 24, 2024
Description
PDF| Dimensions: | ca. 226 x 57 x 18 mm |
| Weight: | ca. 67 g ( = ca. 22 m ) |
| Support: | Not needed |
| Hints: | For drum and pins (version 1) use an outer brim |
Two pieces of the selected pin (pin1 OR pin2) are required.
If necessary, add a text to "emptyLabel", e.g. with the slicer, otherwise "emptyLabel" can also be omitted.
Assembly instructions
- If needed, glue the label onto the "Body".
- Fill the drum with e.g. fine quartz sand to increase the weight (The drum is closed on one side)
- glue one pin on the open side
- Insert the roll and glue a pin on the other side
Tags
Model origin
The author marked this model as their own original creation.
