The Retroid Pocket 4 / Pro is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective case.
There are two models of this case. This is a slim case. Both can be used as a grip or reversed for protection.
I used PLA+, 0.2mm height, 15% infill, and 3 perimeter. I also tried variable layer lines on the curved areas and they came out great. You may notice the top clip will need a long support going up to it since it is an angled bend; I used organic supports for these. I've also provided a model that has the clip split from the body for a cleaner print. You will need to use an adhesive like CA glue for this.
If you feel that the case is too tight or loose to your liking, I suggest scaling in all directions in a tiny amount (100.1 or 99.9, etc).
Check out my profile if you also have a Powkiddy RGB30 & Anbernic RG405M & RG35XX H for similar cases. Happy gaming!
UPDATE 6/21/24: Made case clipping a little tighter.
UPDATE 8/24/24: Made a version with 5mm added to depth of grip.
The author marked this model as their own original creation.