Started from jnorre's spool holder and went a bit apeshit hyper-focused...
18h 59m
1× print file
0.30 mm
0.40 mm
290.00 g
Kingroon KP3S Pro V2
3
16
0
172
updated June 22, 2024

Description

PDF

So starting from jnorre's model, I thought I adapt it a bit to my needs, experiment with some print-in-place rollers and add a variant with a filament guide structure for an insert for a filament guide I had lying around from an old 3d printer. Also added a thread to the holder and a threaded key to lock in the spool. This is made to support spools from Purefil from Fabru GmbH.

Filament: Purefil BioTEC Jet Black

OnShape: https://dub.wfirbolg.ch/spool

Used @TheReverseEng_260391 M10 Hose Connector just for aesthetics  https://dub.wfirbolg.ch/PC4-M10 

Requires spacer to keep using the runout sensor: https://dub.wfirbolg.ch/spacer2

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I really like jnorre's model but I've been having issues with the filament getting caught between the spool and the spool holder and breaking off the filament mid print. 

License