LED Plant Pot

How to print: 

• the top part needs 6 walls and infill 25% (must be waterproof)
• the shade is made using transparent PETG filament

How to build:

I used the following parts for the LED control:

• ESP32 D1 Mini (https://www.az-delivery.de/products/esp32-d1-mini)
• Capacitive Soil Moisture Sensor v1.2 (https://www.az-delivery.de/products/bodenfeuchte-sensor-modul-v1-2)
• simple red and green LED like this one

You find the Arduino .ino file in the download section. Inside the code you see, which pins were used for the red and the green LED and which one for the capacitive sensor. The LEDs are directly connected to the microcontroller without the need of a resistor.