City Scene Box II
Description
PDFTwo buildings plus storage with one little box!
Original design for the 2024 Christmas Community Print Drive.
The lid and the bottom are separate “buildings” for your city scene. They both print upside down with no supports. Then they fit together to make a box! The buildings can be anything in your city that you imagine!
“City Scene Box II” is designed to hold additional items for your play city. It is a companion to the City Scene Box that stores “Street” pieces. This “Box II” holds six of the “Street Squares” that can be used for intersections or corners along with a Stop Sign. Or it fits two Stop Signs or 12 of the blank squares, if preferred.
More Models: Collection of all approved 2024 Christmas Community Print Drive models
Additional Information and Print Settings
The bottom of the box is approximately 68 x 68 x 47 mm and the lid is approximately 68 x 68 x 26 mm. I printed with 0.2 mm layer height, 2 perimeters, 3 top and bottom layers, and 15% infill. No raft. No supports. (Same settings as the original City Scene Box.)
| If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: 2024 Christmas Community Print Drive Printing Guidelines |
More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.
Tags
Model origin
The author marked this model as their own original creation.