Pocket Operator Case Vision 11 (Old)

For the Case you will need 4 M3Bolts with a countersunk head. (2x 20mm long and 2x 10mm long) 

to add the screen guard you will need some glue of choice.

Have fun and please give feedback so i can update the model.

All the special buttons have quite small details and im not shure how they would turn out with a 0.4mm nozzle, i still have to switch to a 0.2 to test it out.

the tolerances are quite snug but on my BambuLab A1 both cases fit without trouble.