Cool holder, it came out perfect using OVERTRUE flat black pro PLA. Used M4K lower half infill at 60 percent and upper at 15 as recommended by others. Think I will drill two small holes and mount it to my enclosure. Thank you!
UFS-109A WIHA 26390 Precision Hex Screwdriver Metric Holder
I saw this Wiha screwdriver tool holder.https://www.thingiverse.com/thing:4960127 I was jealous of the Wiha logo in…
31
173
12
1075
updated
February 22, 2024
Makes
Comments
Looks great and came out really nice!
I used a 60% infill for the bottom and 15% for the top to try to make it a bit heavier at the bottom, and it worked really well (you can do it using a height modifier in prusaslicer).
Printed perfectly and I really like how it turned out. Decided to go with 2 color to help it stand out a bit more.
@SeanMontgomer_393622 that looks really nice. Great contrast for reading the numbers.
This is just what I needed to keep the 7-piece hex set organized. I had to enlarge the holes for the largest two sizes in CAD. My Wiha set did not fit the original holes exactly.
I love this. It is very functional and the shallow tray is ideal. I did use the older version. I just need to figure out how to modify it to fit my Wiha 7pc Phillips/Flat precision screwdriver set (26197). Thank you very much for this design.
Very nice and functional. I had the same issue with the 2.5 and 3.0 which are really tight, while the others are perfect. (edited)
Printed at 25% infill with Prusament PETG.
Like a previous poster, I found the first two holes were much too snug and I had to ream them out with a drill; otherwise solid design!
Excellent design, one of the first things I printed. Will probably add a touch of paint to the numbers to make them pop more but they are very readable as is
Probably had settings messed up, but I had to drill out the 3mm and 2.5mm holes for them to fit. JAYO SILK PLA Black, QIDI ifast.
@pattycakes I had to as well.
