{"data":{"model":{"id":"916131","slug":"voron24-auto-z-probe-block","name":"Voron2.4 Auto Z-Probe Block","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0E-10","myRating":null,"ratingCount":0,"description":"

This adjustment block is designed for the Voron2.4 default proximity switch Z-axis probe setup. It helps determine the offset between the nozzle and the proximity switch trigger point.

Usage Instructions:

1. Insert the block into the Z-axis endstop screw.

2. Place a small metal plate on top of the block.

3. The three holes are for placing 6x3 mm magnets to hold non-adhesive metal plates in place. However, it is recommended to use 25 mm diameter circular metal plates with adhesive backing (thickness is not critical, but 0.3 mm is suggested as this thickness has been tested).

G Code Instructions:

For safety, please verify the following before running the G Code (including but not limited to endstop being blocked by the heated bed, proximity switch detecting the metal plate, Z-axis homing coordinates, and automatic probe relative Z-axis offset adjustment).

Run Z_AUTO_CALIBRATION. If the saved Z-axis offset in the configuration differs significantly after the first run, the value will be automatically updated and the system will reboot. This typically only happens once unless the relative distance between the probe and the nozzle changes. Besides, this macro will update the current Z-axis offset when the configuration error is not significant. This can be run before each print. After running this macro, you can run bed mesh to further level the heated bed.

[gcode_macro Z_AUTO_CALIBRATION_1]\ngcode:\n    {% set config_z_offset = printer.configfile.config['probe']['z_offset'] | float %}\n    {% set current_z_offset = printer.probe.last_z_result - 0.25 %}\n    {% set z_diff = config_z_offset - current_z_offset %}\n    RESPOND MSG=\"Z_AUTO_CALIBRATION_1: {config_z_offset} - {current_z_offset} = {z_diff}\"\n    SET_GCODE_OFFSET Z={z_diff}\n    {% if z_diff < -0.2 or z_diff > 0.2 %}\n        RESPOND MSG=\"WARNING: Z offset difference is significant ({ z_diff }). Adjusting Z offset.\"\n        M400\n        Z_OFFSET_APPLY_PROBE\n        M109 70\n        # SAVE and REBOOT\n        SAVE_CONFIG\n    {% endif %}\n\n[gcode_macro Z_AUTO_CALIBRATION]\ngcode:\n    G28\n    G1 Z10 F3000\n    G1 X96 Y300 Z10 F3000\n    G90\n    G1 Z10 F3000\n    G91\n    # offset 10mm\n    G1 Y-{printer.configfile.settings['probe'].y_offset - 10} F3000\n    G90\n    PROBE\n    M400\n    Z_AUTO_CALIBRATION_1

","category":{"id":"137","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"137","name":"Voron Parts & Upgrades","nameEn":"Voron Parts & Upgrades","description":"Free parts and upgrades for your Voron 3D printer!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-06-18T11:51:25.477551+00:00","firstPublish":"2024-06-18T11:51:25.459695+00:00","datePublished":"2024-06-18T11:51:25.463356+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"Automated Z-Axis Adjustment Probe Block for Voron2.4 Default Z-Axis Probe Setup.","likesCount":1,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":6,"displayCount":118,"filesCount":1,"privateCollectionsCount":0,"publicCollectionsCount":0,"pdfFilePath":"media/prints/916131/pdfs/916131-voron24-auto-z-probe-block-613baf57-09a7-452a-954c-235b991a41f6.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"3250202","filePath":"media/prints/916131/images/6996031_46e86145-3c22-40ff-9e63-cd6973cfe615_d7da8d79-e1fd-4355-827a-b273cfe14d06/img_0836.jpg","rotation":0,"imageHash":"XAgKFQKPd1dl6GCpWrqoeohw2goF","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"},"images":[{"id":"3250202","filePath":"media/prints/916131/images/6996031_46e86145-3c22-40ff-9e63-cd6973cfe615_d7da8d79-e1fd-4355-827a-b273cfe14d06/img_0836.jpg","rotation":0,"imageHash":"XAgKFQKPd1dl6GCpWrqoeohw2goF","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"}],"tags":[{"name":"voron","id":"18078","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3847337","filePreviewPath":"media/prints/916131/previews/0dc3381353849c37105a8083e81262bccdb9125e.png","__typename":"STLType"},"license":{"id":"7","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"1912755","handle":"_1912755","verified":false,"dateVerified":null,"publicUsername":"\u9ede\u7684\u7237\u7237 \u9ede\u7684","avatarFilePath":"media/auth/3de747c5-21dc-43e4-ae97-8f54b1de7b12.png","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"916131","name":"Voron2.4 Auto Z-Probe Block","slug":"voron24-auto-z-probe-block","ratingAvg":"0E-10","likesCount":1,"liked":null,"datePublished":"2024-06-18T11:51:25.463356+00:00","dateFeatured":null,"firstPublish":"2024-06-18T11:51:25.459695+00:00","downloadCount":6,"mmu":false,"category":{"id":"137","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"137","name":"Voron Parts & Upgrades","nameEn":"Voron Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-06-18T11:51:25.477551+00:00","image":{"id":"3250202","filePath":"media/prints/916131/images/6996031_46e86145-3c22-40ff-9e63-cd6973cfe615_d7da8d79-e1fd-4355-827a-b273cfe14d06/img_0836.jpg","rotation":0,"imageHash":"XAgKFQKPd1dl6GCpWrqoeohw2goF","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1912755","handle":"_1912755","verified":false,"dateVerified":null,"publicUsername":"\u9ede\u7684\u7237\u7237 \u9ede\u7684","avatarFilePath":"media/auth/3de747c5-21dc-43e4-ae97-8f54b1de7b12.png","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

Voron2.4 Auto Z-Probe Block

Model files

Voron2.4 Auto Z-Probe Block.stl

Voron2.4 Auto Z-Probe Block.stl

Model origin

License