Door of no return |Ouidah BENIN | Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 2 unique filaments

Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to Charcoal
At layer #15 (1.28mm) swap to Ivory White
At layer #16 (1.36mm) swap to Ivory White
At layer #29 (2.4mm) swap to Charcoal for the rest.