ERCF JailBird modular filiment buffer

here is my Jail Bird modular filament buffer system

it is modular so it is infinate expandable, designed to be used with all ercf, mmu & tradrack systems as well as stock printers, this is my v1 and will be work in progress but works very well.

as your filament retracts it needs somewhere to go, this system will allow the filament to retract around its own spool without tangling or getting snagged and it is alot easier to manage than the ercf cottontail 

parts required per module are: 1x pc4-m10 pneumatic bowden fitting, 8x 608zz bearings,6x m4x12mm screws, 4x m3 knurl nuts (4.5mm diameter 4-8mm long), 6x m5 10mm (if rail mounting), 2020 rail mount recommended for more than 4 modules

 optional needs 8x 5mmx3mm magnets for the lid

feel free to pm me with any feedback or suggestions

Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)