This model was originally designed to hold a TriFlow Road+ CNC high pressure pump on the bicycle seat tube by the bottle bosses.
In the event that bottle bosses are not available provision is made to attach the holder by cable ties that fit through two slots in the holder .
The holder is designed to be a tight fit to prevent the pump jumping out of the holder. However, for additional security provision is made to fit a Velcro strap through a slot in the holder and around the pump body.
Would fit a compatible pump with a body diameter of ~21mm
Dimensions: 26(W) x 30.2(D) x 85 (H) mm
Weight: ~20g
Print Details
Layer Height: 0.15mm
Wall Thickness: 2mm
Infil: 100%
Build Adhesion: Skirt
Recommended to print vertically to maximise strength.
Post Processing
Sanding or filing may be required to remove aberrations that may affect attachment to the frame or fitting of the pump in the holder.
The author marked this model as their own original creation.