SONOS Play 1 Wall Hanger

This is probably the smallest 3D printed wall hanger for SONOS Play 1 speakers. It's designed for both functionality, strength and aesthetics, with a small tilted angle of 15°. It consists of two parts: one that mounts to the wall with two screws and another that attaches to the speaker with a 1/4 inch, 12mm screw. In the wall mount part, add a M5 20mm bult into the plug to make it more sustainable and stronger. 

1/4-20 UNC 12mm speaker screws
https://amzn.to/4cdqC92

Coutersunk screw M5 25mm
https://amzn.to/3YqhB9o

Once installed, the hanger is nearly invisible, making it seem as if your SONOS One speaker is floating. This design keeps your space looking clean and uncluttered while securely holding your speaker in place. It’s a perfect solution for those who want to save space and maintain a sleek, modern look. The speaker part is rotatable, allowing you to adjust the angle for optimal sound distribution.

For maximum strength, print them in either PETG or ASA. I'm not sure about the strength if printed in PLA or similar. Also print them with minimum of 35% infill and as they are placed in the files due to weeknes in the layers if rotated.

Disclaimer: I will not be held responsible for any damage or injury resulting from the use of this 3D printed wall hanger, including if the speaker falls. Please ensure proper installation and use screws suitable for your wall. Also, the links provided in this descriptions contains affiliate links.