Angel in the Sky HueForge and AMS

Angel in the Sky HueForge and AMS 4 Colors
5
23
0
116
updated June 18, 2024

Description

PDF

My mother wanted me to make an angel print so here i'm made her one. Enjoy.

When you scale keep the Depth the same.


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

The Model is 200x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Swap Instructions:
Start with Black
At layer #6 (0.72mm) swap to Cement Gray
At layer #10 (1.04mm) swap to Grey
At layer #14 (1.36mm) swap to White for the rest.
 

Tags



Model origin

The author marked this model as their own original creation.

License