Cold Shoe Remix (Multifunction Arm mounting system)

I originally made the arm to hold my DJI Action 3 to watch my A1 printer but then decided to use it as my mic stand. I needed the ability to adjust the microphone up and down slightly, so this is what I came up with. 

For the remix, I cut a few pieces from the backpack/sling mount, the multifunction arm, and the cold shoe. Now I can make minor adjustments for my Rode Wireless Mic. It took a little effort to screw on because I didn't adjust the support settings, but it works for me.

Settings:

I printed these by object and not by layer. 

Layer Height - .2

Walls - 6
* I used 6 walls  ans suggested from the original model for the multifunction arm and just decided to use it in all the other pieces.

Infill 25%

Supports - Manual 

• Threads and cold shoe areas

Brim - Yes 

• on the ball mount (5mm)
   

I cut few pieces from the backpack/sling mount and added it to the multifunction arm and the cold shoe.