Red Rising - Organizer

Red Rising Boardgame - 3D Insert and Organizer

Notes: 

• No Supports necessary.

• Suggested Settings: 

  • 20% Cubic Infill.

  • 3 Walls

  • 5 Tops

  • 3 Bottoms

• This Insert is Designed to hold the Optional Neoprene Playmat and Standard Board.

• The Left and Right Pieces have optional holes for Optional 8mm (Diameter) X 2mm Round Neodymium Magnets and 4mm (Diameter) X 2mm Round Neodymium Magnets.  (These are not required but work well.)  4 of each Needed. 

• Not all of the Cards Fit in the “RR_Table_Board_Card_Horder_v0” Place the Extras in “RR_Box_Card&Bitd_Holder_v0”.  By the Time you deal the Starting hands, the Table Holder will hold the rest. 

• Card Stand Addition: I have modeled and added the Card Stands that are  next to the play mat. In the Folder you will find a Whole one, and One Cut in Half with Half Pins to hold it together. Prin 2 of Each Pin. I find that this with a touch of CA Glue hold together well. 

Credits Due: 

• I found a Piece Designed By ThoxicThox for Holding your Card Tray Upright and holding your player bits. I designed my insert with the Idea of utilizing the PlayerBoard Created by ThoxicThox. 

• Link to Red_Rising_pBord_v1.stl:  https://www.thingiverse.com/thing:5029978/files

With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask.  I am always happy to help.   

Print the following for Organization:

1x RR_Board&Card_Holder_Left_v0

1x RR_Board&Card_Holder_Right_v0

1x RR_Box_Card&Bitd_Holder_v0

1x RR_Misc_Box_v0

6x RR_Player_Bits_v0 (One for Each Color)

1x RR_Stabilizer_Box_v0

1x RR_Table_Board_Card_Horder_v0

I designed this to be storable both flat on the bottom and sideways in a Kallax.