Voron 2.4 extended spool holder for 3 kg spools

I wasn't happy with other solutions to 3kg spool holders for voron 2.4, and I had the space behind my machine to fit a 3kg spool directly, so this derivative was the best solution for me.

The original design was extended by about 50 mm and can fit up to 125 mm wide spools. The footprint on the frame and mounting hardware is identical to the original and can be taken from the original spool holder, but a ~ 137 mm long piece of PTFE tube needs to be added. The lower PTFE tube from the original design has been removed.

Print settings: Tested with 4 perimiters, 40% infill in ABS

The footprint on the frame and mounting hardware is identical to the original and can be taken from the original spool holder, but a ~ 137 mm long piece of PTFE tube needs to be added. The lower PTFE tube from the original design has been removed.