Tubing Holder with clip

These are printable tubing holders for drip line that you might route to hanging plants on the porch or patio. You could also use them for a patio mist system. 

There are two screw size options. The larger one is for a drywall size screw. The smaller screw is for a #6 screw. 

There are also two securing options. You could use a zip tie or you could print the clip and slide it over the holder. I think both are fine.

Printing the holder/clip in the same color as your tubing is a nice effect.

I chose to use the #6 screw, ¾", with the clip. 

TBH, I chose to print the holder at a 15-degree angle (turn the model 15 degrees, then split the model), which strengthens the model (diagonal layering), helps with sliding the clip on, and reduces the material a bit.

Enjoy!