Hoover TE70-TE75 Gasket Seal
I've made this in TPE to replace the original worn gasket
0
7
0
48
updated June 16, 2024
Description
PDFPrinted with these settings:
-0.8mm nozzle
-TPE Esun (works probably well with TPU)
-0.5mm layer height
-4 top layers (for durability)
-Two walls
-3D Honeycomb infill @40% (reduce this percentage with TPU).
-Use a modifier to reduce infill to 15% after the ridges and 1 wall (if using 0.8 nozzle)
Tags
Model origin
The author marked this model as their own original creation.
