AD5M, Stock 0.2 OrcaSlicer profile
Layer Height: 0.12
Perimeters: 2
Slow down on overhangs
PETG tempereature: 270'
HotBed temp: 75'
Part cooling Fan: 10-50%
You will need 5x3 mm magnets.
UPD 24.07.2024: V3
- Hopefully, more efficient air flow.
- Nicer Design.
- Slightly easier to print.
UPD 18.06.2024: V2
- Less outer overhangs.
- Squared design.
The author remixed this model.
I just made it so the stock Fan would fit and extended the right channel so they are both the same. Also Made the air intake opening bigger.
Now my AD5M is blowing stronger.