Ender 3 V3 KE/SE Tool Holder - Desk/Bench Mount

Hey all,

I am uploading my model for a tool holder to fit all the basic Ender 3 V3 KE tools that come included with the box as well as some additional holders that I found weren't included on any other models. Therefore I made my own!

Includes;
5 x Allen key Holder - 4mm, 3mm, 2.5mm, 2mm, 1.5mm
Spanner Holders - for both included spanners
Screwdriver Holder
Side Cutter Holder

Extra inclusions;
10 Inserts for nozzles - will fit all Ender 3 V3 SE/KE nozzles
Wire brush Holder
Throat cleaning pin Holder.

Required Screws - I used two, 4x25mm Wood screws to go through the base, screw section is 9mm thick.

This is my first model ever created through the free Onshape CAD software online. Highly recommend if anyone is looking to make their own parts!

Printed on a Creality V3 KE in 1-1.5 hours, I used 15% Density Rectilinear infill but you could go much lower for sure. Thanks and hope someone finds it useful!