I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of 1/8" acrylic in front of the photo but that is optional. If you decide to use a different thickness glass front or none at all, just adjust the Z scale of the “Photo Spacer” component in slicer to make up for the change.
I natively design in Imperial units so you may have to deal with it in your slicer accordingly. Typically setting your scale to 2540% will convert the small files into the proper dimension.
The author marked this model as their own original creation.