Feller T12+T13 Button/Socket Hue Dimmer Cover

There is always that somone switching off the Hue lamps on the main button instead of using the Hue Dimmer switch. So I desided to create a cover for this button. There are two versions one for old style T12 and one for T13 with button and power socket.

The button is still accessible in case of problems with the Hue lamp. 
There are two holes in th back for magnets as its in the Hue Dimmer base.

Supports are needed as the back is mostly floating. But the supports are quite easy to remove.

I used PETG V0 with 0.15mm layer height to print