Sink

My garage didn't have a sink or even a drain, so I made this small sink that drains into a garden hose that can be routed out into the nearest storm drain (which is just outside, in my case).

It's big enough for me to wash my hands and some small tools such as paint brushes. However, it does not drain very fast, so limited flow can be achieved. Switching to a ¾" diameter hose would probably help with that.

I printed the main body, the hose fitting and the nut using Grey add:north Economy PETG with 20% gyroid infill and the gasket and the stopper using Black Overture Speed TPU with 100% infill. PLA should be fine if it's inside and only cold water comes from the faucet.

The sink is 220 mm wide, 78 mm tall and it protrudes 162 mm from the wall. The dimensions are limited by the print volume of my Creality K1. If you have a bigger printer, you can modify the model in onshape here: https://cad.onshape.com/documents/5b299dddcce238214f6ae67c/w/40df1762fb58abd19e4155ce/e/2c68ac9293b4ce556733fcf8?renderMode=0&uiState=666dcb47e7f38b7f580b33af