Hardware free BCAR for the Nerf Infinus

Edit 05/10/2024: After some more modification i've updated the design and it's now compatible with any dart design.

Introduction

This is an internal BCAR for the Infinus based on the Hardware free BCAR by LeedleDynamics. The rollers have been redesigned in order to reduce the friction since the Infinus can't use Short Darts.

Dart Compatibility  (only  applicable  to  the  v1  version) 

This mod was only compatible with narrow headed darts, so you can't use Dart Zone Waffle Heads, Chili Darts or the X-Shot Insanity Darts because they get stuck on the rollers and cause nearly catastrophic failures. I have tested the X-Shot Pro Long Darts (the one included with their Longshot) and some off-brand Waffle darts with narrow heads (check photos), but in theory it should also work with the Worker Long Darts and the various long versions of the Dart Zone Pro darts. Elites seem to not work particularly well, but on the other end they are not very accurate to begin with.

Printing Instructions

The main body can be printed with the shorter tube on the bed and it needs a brim both on the inside and the outside, the rollers and the pins can simply be printed with their sides on the bed. 

Assembly Instructions

Assemble it just like you would the standard BCAR, when done just replace the stock barrel tube with this one and you're done.

Added mounting points for the Infinus and redesigned the wheels