Porsche 911 GT3 RS "Filament Painting"

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Prusament PETG Jet Black
Prusament PETG Anthracite Grey
Prusament PETG Urban Grey
Prusament PETG Signal White

Swap Instructions:
Start with Jet Black
At layer #12 (1.04mm) swap to Anthracite Grey
At layer #29 (2.4mm) swap to Urban Grey
At layer #30 (2.48mm) swap to Signal White for the rest.