74mm Model Rocket Tube Avionics Bay for BPS Blip

This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a74mm Model Rocket.

It connects 2 (74mm) x cardboard body tubes and holds the battery and the BLIP PCB Board in place.

It is designed to be used with body tubes like this ones:
Apogee - 74mm x 18" Body Tube (Thin Wall 3" tube)

It is meant to substitute 3" Tube couplers, such as:
Apogee - Tube Coupler for 3" diameter Thin-Wall Model Rocket Body Tubes

You will need 4 screws (2.5/3mm) to hold the coupler to the tube in place, plus 3mm screws to hold the PCB in place.

You may find more info about the avionics/flight computer Blip on YouTube here or at BPS website. Blip is an open source flight computer, however it is a starting point for your own projects. The PCB files are available for patreons of BPS (Not related to me). 

Print instructions

Category: Vehicles Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: .20

Infill: 15%

Filament: Any PLA or PETG

 

Version History

• Added Step (stp) file.